Key takeaways
- The chip in an NFC business card has no battery: the phone's field powers it for the time of the read.
- For a business card, the chip simply holds a web address, which compatible phones open without an app.
- iPhones read chips in the background from the iPhone XS onwards, while the phone is in use; Android phones read them when the screen is unlocked and NFC is on.
- On kaard.me, the chip holds a short address that keeps working if you change your card's address, and that can be turned off remotely.
Contents
What is inside an NFC card
An NFC card (near field communication) holds two parts embedded in plastic, wood or paper: a chip a few millimetres wide and a coil-shaped antenna. The chip has no battery. When a compatible phone comes close, its electromagnetic field powers the chip, which sends back its content. The range is no more than a few centimetres, so reading it takes a deliberate gesture.
Business cards mostly use NTAG chips made by NXP, which follow the Type 2 tag format defined by the NFC Forum. Their memory is small, but a web address only takes a few dozen bytes.
| Chip | Usable memory |
|---|---|
| NTAG213 | 144 bytes |
| NTAG215 | 504 bytes |
| NTAG216 | 888 bytes |
Capacities given on NXP's official page for the NTAG213, NTAG215 and NTAG216 chips, checked on 21 November 2026.
What happens when the phone comes close
Reading an NFC business card always follows the same sequence:
- The phone, with its screen on and NFC active, looks for nearby chips.
- The card enters its field: the chip powers up and sends its message, here a web address.
- The system recognises a link and shows a notification or opens the browser, depending on the phone.
- The page opens like any website: the page, not the chip, shows your contact details and links.
iPhone and Android: what differs
On iPhone, background reading without an app is supported from the iPhone XS onwards. It works while the iPhone is in use: a notification appears, and tapping it opens the link in Safari. If the iPhone is locked, it first asks you to unlock it. Apple says this reading is unavailable if the device has never been unlocked since it started, while the camera or Apple Pay is in use, and in airplane mode. For contactless use, Apple advises holding the top of the iPhone near the reader: that is the part to bring to the card.
On Android, the official documentation says phones look for NFC chips when the screen is unlocked, unless NFC is turned off in the settings. That is the first thing to check when nothing happens. The antenna's position depends on the model, most often on the back: move the card slowly to find the right spot. According to the same documentation, from Android 17 a link read from a chip shows up as a notification to tap, as on iPhone.
Sources: Apple developer documentation (Core NFC, background tag reading), Apple support on contactless payments, Android developer documentation (NFC basics), checked on 21 November 2026. This behaviour can change with new system versions.
Why a tap sometimes fails
Before deciding a card is faulty, check these points:
- NFC is turned off in the settings, or the phone does not have it.
- The screen is off or locked, or the camera is open.
- The card is not in front of the antenna: on iPhone, bring the top of the phone; on Android, look for the spot on the back.
- A thick or metal case sits between the phone and the card.
- The chip is stuck directly on metal, which disrupts reading: so-called on-metal stickers exist for this case.
- The chip is blank, badly written or damaged: a bent card can break the antenna.
Writing and protecting a chip
A blank chip is written with a phone. On Android, Chrome can write directly from a web page thanks to Web NFC, a feature Chrome only offers on Android. On iPhone, you need a writing app such as NFC Tools.
Writing apps also offer to lock the chip as read-only. This prevents anyone from rewriting it, but it is permanent: you will never be able to change its content or reuse the card. For a sticker left in a public place, on a counter or a table, locking protects against a malicious rewrite. For a card you keep on you, it mostly takes away the option to reuse it.
What kaard.me does with the chip
On kaard.me, the chip does not hold your card's address but a short address: kaard.me/n/ followed by an eight-character code. You create it in the Share tab of the editor, "NFC card" section, then write it from Chrome on Android or with NFC Tools on iPhone, to a blank card or sticker with an NTAG215 or NTAG216 chip.
This intermediate address has three benefits. If you change your card's address, the chip keeps working without being rewritten. Every tap is counted with the source "nfc" in your analytics, without cookies. And a lost card can be turned off remotely, then turned back on if you find it. You can link up to 20 NFC cards to the same kaard.me card, for free: you only buy the blank card.
Frequently asked questions
Can an NFC card read the data on my phone?
No. A business card chip has no battery and only sends its content, here a web address, to the phone that powers it. It reads nothing from the phone, and the phone is what offers to open the link.
Can every phone read NFC cards?
No. The phone needs NFC: on iPhone, reading without an app is supported from the iPhone XS onwards, and most Android phones have it, with a setting to turn on if needed. For other phones, print a QR code on the back of the card.
Do I need to rewrite the card when I edit my kaard.me page?
No. The chip holds a short address that leads to your card: your edits, and even a change of your card's address, need no rewriting.
How close does the card need to be?
A few centimetres, ideally touching. On iPhone, bring the top of the phone. On Android, the antenna is usually on the back, in a spot that depends on the model.
Written and checked by the kaard.me team